Highway Engineering Select the correct statement. More the value of CBR, greater thickness of pavement will be required Minimum and maximum values of group index can be 0 and 20 respectively More the value of group index, less thickness of pavement will be required All of these More the value of CBR, greater thickness of pavement will be required Minimum and maximum values of group index can be 0 and 20 respectively More the value of group index, less thickness of pavement will be required All of these ANSWER DOWNLOAD EXAMIANS APP
Highway Engineering “Dead Slow” is a regulatory sign warning sign None of these informatory sign regulatory sign warning sign None of these informatory sign ANSWER DOWNLOAD EXAMIANS APP
Highway Engineering In CBR test the value of CBR is calculated at 7.5 mm penetration only 2.5 mm penetration only 5.0 mm penetration only both 2.5 mm and 5.0 mm penetrations 7.5 mm penetration only 2.5 mm penetration only 5.0 mm penetration only both 2.5 mm and 5.0 mm penetrations ANSWER DOWNLOAD EXAMIANS APP
Highway Engineering In highway construction on super elevated curves, the rolling shall proceed from sides towards the centre upper edge towards the lower edge lower edge towards the upper edge centre towards the sides sides towards the centre upper edge towards the lower edge lower edge towards the upper edge centre towards the sides ANSWER DOWNLOAD EXAMIANS APP
Highway Engineering The camber for hill roads in case of bituminous surfacing is adopted as 0.04 0.025 0.03 0.02 0.04 0.025 0.03 0.02 ANSWER DOWNLOAD EXAMIANS APP
Highway Engineering When the bituminous surfacing is done on already existing black top road or over existing cement concrete road, the type of treatment given is Tack coat Spray of emulsion Prime coat Seal coat Tack coat Spray of emulsion Prime coat Seal coat ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS