Power Systems Which of the following grounding is not practically preferred for protection of equipments? resistance grounding reactance grounding All of these isolated grounding resistance grounding reactance grounding All of these isolated grounding ANSWER DOWNLOAD EXAMIANS APP
Power Systems A 3 layer and diameter of each strand is d, then find the total diameter of ACSR conductor? 2d 3d 5d d 2d 3d 5d d ANSWER DOWNLOAD EXAMIANS APP
Power Systems The positive, negative and zero sequence impedances of a transmission line are 0.5,0.5 and 1.1 pu respectively. The self (Zs) and mutual (Zm) impedances of the line will be given by Zs = 0.6 pu, Zm =0.5 pu Zs = 0.7 pu, Zm =0.2 pu Zs = 0.5 pu, Zm =0.6 pu Zs = 0.2 pu, Zm =0.7 pu Zs = 0.6 pu, Zm =0.5 pu Zs = 0.7 pu, Zm =0.2 pu Zs = 0.5 pu, Zm =0.6 pu Zs = 0.2 pu, Zm =0.7 pu ANSWER DOWNLOAD EXAMIANS APP
Power Systems Most commonly used material for insulator is mica All of these glass porcelain mica All of these glass porcelain ANSWER DOWNLOAD EXAMIANS APP
Power Systems The surge impedance of a 400 km long overhead transmission line is 420 Ω. For a 200 km length of the same line, the surge impedance will be 840 Ω 420 Ω 210 Ω 400 Ω 840 Ω 420 Ω 210 Ω 400 Ω ANSWER DOWNLOAD EXAMIANS APP
Power Systems A 3-phase, 110 kV coaxial XLPE insulated power cable delivering power at 50 Hz, has a capacitance of 125 nF/km. If the dielectric loss tangent of XLPE is 2*10^-4, then dielcetric power loss in this cable in W/km/phase is 23.9 35.45 31.7 38.6 23.9 35.45 31.7 38.6 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS