Electrical Machines Ward-Leonard control is basically a ___________ control method. Field diverter control. Field control. Armature voltage control. Armature resistance control. Field diverter control. Field control. Armature voltage control. Armature resistance control. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Consider the following statements regarding the speed control of dc motors : 1. ward-leonard method is suitable forconstant-torque drives 2. Ward-leonard method is suitable for constant-power drives 3. field-control method facilitates speed control below base speed 4. Armature-resistance control method is more efficient than ward-leanard method 5. Field-control method is suitable for constant-torque drives 6. Armature-resistance control method is suitable for constant-torque drives From these, the correct answer is 1, 2, 5 1, 3, 5 1, 4, 6 1, 2, 6 1, 2, 5 1, 3, 5 1, 4, 6 1, 2, 6 ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines The power flow of a dc motor, with respect to a DC generator is increased. reversed. modified. none of these. increased. reversed. modified. none of these. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A 220 ,V 15 , kW 100 rpm shunt motor with armature resistance of 0.25 , W has a rated line current of 68 A and a rated field current of 2.2 A. The change in field flux required to obtain a speed of 1600 rpm while drawing a line current of 52.8 A and a field current of 1.8 A is 36.36% decrease 18.18% increase 36.36% increase 36.36% increase 36.36% decrease 18.18% increase 36.36% increase 36.36% increase ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines In which of the following generators negative voltage regulation can occur? series generators shunt generator over compound generator both B and C series generators shunt generator over compound generator both B and C ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines In a dc generator operating on load with its brushes on the geometrical neutral axis (GNA), the magnetic neutral axis (MNA) is shifted in the direction of rotation. Now, if the brushes are given a lead of 90° (electrical), then the MNA will coincide with the GNA shift forward by more than 90° shift forward by 90° shift forward by less than 90° coincide with the GNA shift forward by more than 90° shift forward by 90° shift forward by less than 90° ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS