Surveying Three point problem can be solved by Tracing paper method All of these Lehman’s method Tracing paper method Tracing paper method All of these Lehman’s method Tracing paper method ANSWER DOWNLOAD EXAMIANS APP
Surveying In direct method of contouring, the process of locating or identifying points lying on a contour is called horizontal control ranging vertical control centring horizontal control ranging vertical control centring ANSWER DOWNLOAD EXAMIANS APP
Surveying 23 cm × 23 cm photographs are taken from a flying height with a camera of focal length of 3600 m and 15.23 cm respectively. A parallax difference of 0.01 mm represents 2 m 1 m 3 m 4 m 2 m 1 m 3 m 4 m ANSWER DOWNLOAD EXAMIANS APP
Surveying The rise and fall method is not suitable for levelling with tilting levels provides a check on the reduction of intermediate point levels quicker and less tedious for large number of intermediate sights is less accurate than height of instrument method is not suitable for levelling with tilting levels provides a check on the reduction of intermediate point levels quicker and less tedious for large number of intermediate sights is less accurate than height of instrument method ANSWER DOWNLOAD EXAMIANS APP
Surveying The flying height of the camera is 1,000 m above mean ground level, the distance of the top of a building from a nadir point is 10 cm and the relief displacement of building is 7.2 mm. The height of the building, is 82 m 62 m 72 m 52 m 82 m 62 m 72 m 52 m ANSWER DOWNLOAD EXAMIANS APP
Surveying Polaris is usually observed for the determination of the azimuth when it is Either at culmination or at elongation At culmination Neither at culmination nor at elongation At elongation Either at culmination or at elongation At culmination Neither at culmination nor at elongation At elongation ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS