Process Equipment and Plant Design Scale up problem in design based on the similarity concept takes into account __________ similarity. Kinematic Geometrical All of these Dynamic Kinematic Geometrical All of these Dynamic ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design The diameter of a propeller agitator used in agitation tank ranges from __________ percent of the tank diameter and its peripherial speed is normally 300 to 500 metres/minute. 55 to 75 5 to 10 40 to 50 15 to 30 55 to 75 5 to 10 40 to 50 15 to 30 ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design The buckling tendency of compression members is always in the direction of the Least radius of gyration None of these Perpendicular to the axis of the load Axis of the load Least radius of gyration None of these Perpendicular to the axis of the load Axis of the load ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design Elastic failure of a material occurs, when the tensile stress equals yield strength, yield point or the elastic limit. Also, the elastic failure occurs according to maximum strain theory, when the maximum tensile strain equals (where, σ = yield strength and E = modulus of elasticity) E Σ E/σ Σ/E E Σ E/σ Σ/E ANSWER DOWNLOAD EXAMIANS APP
Process Equipment and Plant Design In common bubble cap distillation column design practice, riser area is approximately equal to (where, Aa = Annular passage area, and Sa = Slot area) 1.2 Aa = 1.2 Sa Aa = Sa Aa = 1.5 Sa Sa = 1.5 Aa 1.2 Aa = 1.2 Sa Aa = Sa Aa = 1.5 Sa Sa = 1.5 Aa ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS