Mass Transfer In batch distillation with constant reflux, overhead product composition __________ with time. May increase on decrease, depends on the system Does not vary Decreases Increases May increase on decrease, depends on the system Does not vary Decreases Increases ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer In steam distillation, the Temperature is more than 100° C Temperature is higher than the boiling point of either component Product must be immiscible with water Temperature is 100°C Temperature is more than 100° C Temperature is higher than the boiling point of either component Product must be immiscible with water Temperature is 100°C ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer When the temperature and humidity of air is low, we usually use __________ draft cooling tower. Induced Forced Natural None of these Induced Forced Natural None of these ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer For turbulent mass transfer in pipes, the Sherwood number depends on the Reynolds number as Re Re0.33 Re0.53 Re0.83 Re Re0.33 Re0.53 Re0.83 ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer The velocity, concentration and temperature boundary, for the boundary layer development on a flat plate during connective mass transfer will be same, if NSc = 1 NPr = NLe NSc = NPr = NLe NSc = NLe NSc = 1 NPr = NLe NSc = NPr = NLe NSc = NLe ANSWER DOWNLOAD EXAMIANS APP
Mass Transfer Fenske's equation for determining the minimum number of theoretical stages in distillation column holds good, when the Mixture (to be separated) shows negative deviation from ideality Multicomponent distillation is involved Mixture (to be separated) shows positive deviation from ideality Relative volatility is reasonably constant Mixture (to be separated) shows negative deviation from ideality Multicomponent distillation is involved Mixture (to be separated) shows positive deviation from ideality Relative volatility is reasonably constant ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS