Machine Design According to Indian standard specifications, 100 H6/g5 means that the None of these Basic size is 100 mm Actual size is 100 mm Difference between the actual size and basic size is 100 mm None of these Basic size is 100 mm Actual size is 100 mm Difference between the actual size and basic size is 100 mm ANSWER DOWNLOAD EXAMIANS APP
Machine Design Yield point in fatigue loading as compared to static loading is Depends on other factors Same Higher Lower Depends on other factors Same Higher Lower ANSWER DOWNLOAD EXAMIANS APP
Machine Design If shearing stress in nut is half the tensile stress in a bolt, then nut length should be equal to 1.25 × diameter of bolt 1.5 × diameter of bolt Diameter of bolt 0.75 × diameter of bolt 1.25 × diameter of bolt 1.5 × diameter of bolt Diameter of bolt 0.75 × diameter of bolt ANSWER DOWNLOAD EXAMIANS APP
Machine Design When an open coiled helical compression spring is subjected to an axial compressive load, the maximum shear stress induced in the wire is (where D = Mean diameter of the spring coil, d = Diameter of the spring wire, K = Wahl's stress factor, and W = Axial compressive load on the spring) (8WD/ πd3) × K (2WD/ πd3) × K (WD/ πd3) × K (4WD/ πd3) × K (8WD/ πd3) × K (2WD/ πd3) × K (WD/ πd3) × K (4WD/ πd3) × K ANSWER DOWNLOAD EXAMIANS APP
Machine Design If d is the normal diameter of a bolt in mm, then the initial tension in kg in a bolt used for making a fluid tight joint as for steam engine cover joint is calculated by the relation 138 d 124 d 168 d 151 d 138 d 124 d 168 d 151 d ANSWER DOWNLOAD EXAMIANS APP
Machine Design The fatigue stress concentration factor is defined as The product of the endurance limits with and without stress concentration The ratio of endurance limit with stress concentration to the endurance limit without stress concentration All of these The ratio of endurance limit without stress concentration to the endurance limit with stress concentration The product of the endurance limits with and without stress concentration The ratio of endurance limit with stress concentration to the endurance limit without stress concentration All of these The ratio of endurance limit without stress concentration to the endurance limit with stress concentration ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS