Power Systems Which of the following plants is/are base load plants pump storage nuclear both 1 and 2 run off river pump storage nuclear both 1 and 2 run off river ANSWER DOWNLOAD EXAMIANS APP
Power Systems A power station plant load factor is defined as the ratio of minimum load to peak load minimum load to average load the energy generated to that of maximum energy that could have been generated average load to the peak load minimum load to peak load minimum load to average load the energy generated to that of maximum energy that could have been generated average load to the peak load ANSWER DOWNLOAD EXAMIANS APP
Power Systems When bundle conductor are used in place of single conductor the effective inductance and capacitance will respectively increase and remain unaffected. decrease and remain unaffected. decrease and increase. increase and decrease. increase and remain unaffected. decrease and remain unaffected. decrease and increase. increase and decrease. ANSWER DOWNLOAD EXAMIANS APP
Power Systems An unloaded generator with a pre-fault voltage 1 pu has the following sequence impedance: Z0 = j 0.15 pu, Z1 = Z2 = j 0.25 pu The neutral is grounded with a reactance of 0.05 pu. The fault current in pu for single line to ground fault is 7.25 pu 4.28 pu 2.5 pu 3.75 pu 7.25 pu 4.28 pu 2.5 pu 3.75 pu ANSWER DOWNLOAD EXAMIANS APP
Power Systems Which of the following produces the radio interference in communication lines? None of these electro magnetic induction electro static induction both 1 and 2 None of these electro magnetic induction electro static induction both 1 and 2 ANSWER DOWNLOAD EXAMIANS APP
Power Systems The power generated by two plants are; P1 = 50 MW, P2 = 40 MW. If the loss coefficients are B11 = 0.001, B22 = 0.0025 and B12 = -0.0005, then power loss will be 4.5 MW 6.5 MW 8.5 MW 5.5 MW 4.5 MW 6.5 MW 8.5 MW 5.5 MW ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS