Power Systems Which of the following is/are base load plants? nuclear plants hydro plants thermal plants All of these nuclear plants hydro plants thermal plants All of these ANSWER DOWNLOAD EXAMIANS APP
Power Systems If the breakdown voltage of the insulator is high, the thickness of the insulator is it does not related to breakdown voltage high None of these less it does not related to breakdown voltage high None of these less ANSWER DOWNLOAD EXAMIANS APP
Power Systems Surge impedance loading of a transmission line can be increased by both 1 and 3 addition of lumped capacitance in series increasing its voltage level addition of lumped inductance in parallel both 1 and 3 addition of lumped capacitance in series increasing its voltage level addition of lumped inductance in parallel ANSWER DOWNLOAD EXAMIANS APP
Power Systems The positive, negative and zero sequence per unit impedance of two generators connected in parallel are X1 = 0.12 pu, X2 = 0.096 pu and X0 = 0.036 pu. For LG fault at generator terminals (with 1 pu voltage) the positive sequence current will be 10.936 pu 8.936 pu 7.936 pu 9.936 pu 10.936 pu 8.936 pu 7.936 pu 9.936 pu ANSWER DOWNLOAD EXAMIANS APP
Power Systems A thermal generating station has an installed capacity of 15 MW and supplies a daily load of 10 MW for 12 hours and 5 MW for remaining 12 hours. The plant capacity factor for the station is 0.5 0.75 1 0.6 0.5 0.75 1 0.6 ANSWER DOWNLOAD EXAMIANS APP
Power Systems An isolated synchronous generator with transient reactance equal to 0.1 pu on a 100 MVA base is connected to the high voltage bus through a step up transformer of reactance 0.1 pu on a 100 MVA base. The fault level at the bus is 200 MVA 100 MVA 500 MVA 400 MVA 200 MVA 100 MVA 500 MVA 400 MVA ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS