Machine Design When a circular beam of diameter d is subjected to a shear force F, the maximum shear stress induced will be 16F/ 3πd² 4F/ πd² 6F/ πd² 8F/ πd² 16F/ 3πd² 4F/ πd² 6F/ πd² 8F/ πd² ANSWER DOWNLOAD EXAMIANS APP
Machine Design The usual clearance provided in hydrodynamic bearing per mm of diameter of shaft is 0.1 micron 0.01 micron 1 micron 10 microns 0.1 micron 0.01 micron 1 micron 10 microns ANSWER DOWNLOAD EXAMIANS APP
Machine Design At low temperatures (say 75°C) the notched bar impact value of steel Depends on heat treatment carried out Increases markedly Remain same Decreases markedly Depends on heat treatment carried out Increases markedly Remain same Decreases markedly ANSWER DOWNLOAD EXAMIANS APP
Machine Design In worm gears, the angle between the tangent to the pitch helix and an element of the cylinder, is known as Pressure angle Helix angle Pitch lead angle None of these Pressure angle Helix angle Pitch lead angle None of these ANSWER DOWNLOAD EXAMIANS APP
Machine Design The notch angle of the Izod impact test specimen is 20° 30° 10° 45° 20° 30° 10° 45° ANSWER DOWNLOAD EXAMIANS APP
Machine Design Failure of a material is called fatigue when it fails Below the yield point At the yield point Below the elastic limit At the elastic limit Below the yield point At the yield point Below the elastic limit At the elastic limit ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS