Computer Hardware What tool is used to test serial and parallel ports? None of these high volt probe cable scanner loop backs (wrap plugs) sniffer None of these high volt probe cable scanner loop backs (wrap plugs) sniffer ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware To prevent the computer from overheating you should? Keep the computer cover closed All of these Remove the CPU fan Remove the slot cover from the back None of these Keep the computer cover closed All of these Remove the CPU fan Remove the slot cover from the back None of these ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware After displaying the directory of a floppy disk, a different floppy is inserted into the drive. The contents of the original floppy continue to display regardless of the director requests on the other floppies placed in the drive. You remove the drive in question and install it into your test system, and it does not exhibit the problem. You should next replace the: System's floppy drive device driver Original IDE controller System's power supply Floppy drive ribbon cable None of these System's floppy drive device driver Original IDE controller System's power supply Floppy drive ribbon cable None of these ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware To install a second IDE drive into a computer, you must Verify that you define the new drive as D: in the CMOS setup Use the IDE configuration software to set the new drive as slave Set the master-slave jumper to slave on the second drive Verify that you attach the drive to the connector at the end of the ribbon cable Verify that you define the new drive as D: in the CMOS setup Use the IDE configuration software to set the new drive as slave Set the master-slave jumper to slave on the second drive Verify that you attach the drive to the connector at the end of the ribbon cable ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware What is the most likely cause of an "FDD controller Failure" error message? your computer's floppy drive is defective you installed the floppy disk drive cable backward you forgot to flash CMOS None of these you did not set the jumper on the floppy drive to drive A your computer's floppy drive is defective you installed the floppy disk drive cable backward you forgot to flash CMOS None of these you did not set the jumper on the floppy drive to drive A ANSWER DOWNLOAD EXAMIANS APP
Computer Hardware Which component must be vacuumed or replaced during preventative maintenance on a laser printer? Scanning mirror Toner cartridge All of the listed here Ozone filter Scanning mirror Toner cartridge All of the listed here Ozone filter ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS