Engineering Drawing The lines used to create the auxiliary view should appear as ________ in the finished view. Reference lines Object lines Construction lines Construction lines Reference lines Object lines Construction lines Construction lines ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing These gears transmit power between shafts whose axes intersect at any angle: Spur gears Racks Worm gears Bevel gears Spur gears Racks Worm gears Bevel gears ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing In multi-view drawing it is common practice to include three views, the front, the top and the right side. If no dimensions are required on the right side view the drafter can ________. None of these Leave the view as is Eliminate the view Use the left view instead None of these Leave the view as is Eliminate the view Use the left view instead ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing In oblique sketches, the most commonly used angles for receding lines are: 15 or 30 degrees 25 or 30 degrees 45 or 60 degrees 30 or 45 degrees 15 or 30 degrees 25 or 30 degrees 45 or 60 degrees 30 or 45 degrees ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing Angles project true size only when the plane containing the angle and plane of projection are this: Parallel Perpendicular Adjacent Aligned Parallel Perpendicular Adjacent Aligned ANSWER DOWNLOAD EXAMIANS APP
Engineering Drawing This is the total amount that the feature on the actual part is allowed to vary from what is specified by the dimension: Tolerance Specification Difference Allowance Tolerance Specification Difference Allowance ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS