Building Construction The inclined support at the ends of treads and rises of a stair, is known as Baluster Beam Header String Baluster Beam Header String ANSWER DOWNLOAD EXAMIANS APP
Building Construction In flat roof of reinforced cement concrete, the recommended angle of slope, is Zero 10° 200° A few degrees Zero 10° 200° A few degrees ANSWER DOWNLOAD EXAMIANS APP
Building Construction Two columns 50 cm × 50 cm and 60 cm × 60 cm carry 80 tonnes and 120 tonnes of loads respectively. The centre to centre distance between columns is 5.00 metres. The permissible bearing capacity of the soil is 20 t/m2. If the footing is not to project more than 25 cm beyond the outside of the smaller column, pick up the correct design parameters of the footing from the following: Distance of C.G. of the loads from the smaller column = 3.00 m The length of the foundation slab = 7.00 m Area of footing slab = 11.00 m2 All listed here Distance of C.G. of the loads from the smaller column = 3.00 m The length of the foundation slab = 7.00 m Area of footing slab = 11.00 m2 All listed here ANSWER DOWNLOAD EXAMIANS APP
Building Construction The depth of an arch is the distance between Crown and ground level Ground level and springing line Intrados and extrados Crown and springing line Crown and ground level Ground level and springing line Intrados and extrados Crown and springing line ANSWER DOWNLOAD EXAMIANS APP
Building Construction A projecting piece usually provided to support a truss, is Cornice Frieze Coping Lintel Cornice Frieze Coping Lintel ANSWER DOWNLOAD EXAMIANS APP
Building Construction If height of the first storey of a building is 3.2 m and riser is 13 cm, the number of treads required, is 24 18 12 25 24 18 12 25 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS