Manufacturing And Production Technology The helix angle of a drill is ___ for drilling brass. Equal to 30° None of the listed here Less than 30° More than 30° Equal to 30° None of the listed here Less than 30° More than 30° ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology Flank wear depends upon the Degree of strain hardening in the chip All of these Hardness of the work and tool material at the operating temperature Amount and distribution of hard constituents in the work material Degree of strain hardening in the chip All of these Hardness of the work and tool material at the operating temperature Amount and distribution of hard constituents in the work material ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In centre less grinders, the maximum angular adjustment of the regulating wheel is 20° 15° 5° 10° 20° 15° 5° 10° ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology As the cutting speed increases, the tool cutting forces Increases Decreases First increases and then decreases Remain constant Increases Decreases First increases and then decreases Remain constant ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In lapping operation, the amount of metal removed is 0.005 to 0.01 mm 0.5 to 1 mm 0.05 to 0.1 mm 0.01 to 0.1 mm 0.005 to 0.01 mm 0.5 to 1 mm 0.05 to 0.1 mm 0.01 to 0.1 mm ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The correct sequence of the following parameters in order of their maximum to minimum influence on tool life is Feed rate, depth of cut, cutting speed Cutting speed, feed rate, depth of cut Depth of cut, cutting speed, feed rate Feed rate, cutting speed, depth of cut Feed rate, depth of cut, cutting speed Cutting speed, feed rate, depth of cut Depth of cut, cutting speed, feed rate Feed rate, cutting speed, depth of cut ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS