Environmental Engineering Standard EDTA (ethylene diamine tetra acetic acid) solution is used to determine the Turbidity in water Residual chlorine in water Dissolved oxygen in water Hardness in water Turbidity in water Residual chlorine in water Dissolved oxygen in water Hardness in water ANSWER DOWNLOAD EXAMIANS APP
Environmental Engineering In a BOD test, 1.0 ml of raw sewage was diluted to 100 ml and the dissolved oxygen concentration of diluted sample at the beginning was 6 ppm and it was 4 ppm at the end of 5 day incubation at 20°C. The BOD of raw sewage will be 200 ppm 300 ppm 100 ppm 400 ppm 200 ppm 300 ppm 100 ppm 400 ppm ANSWER DOWNLOAD EXAMIANS APP
Environmental Engineering The distribution mains are designed for Average daily demand Maximum daily demand Maximum hourly demand Maximum hourly demand on maximum day Average daily demand Maximum daily demand Maximum hourly demand Maximum hourly demand on maximum day ANSWER DOWNLOAD EXAMIANS APP
Environmental Engineering The working conditions in imhoff tanks are Aerobic only Aerobic in lower compartment and anaerobic in upper compartment Anaerobic only anaerobic in lower compartment and aerobic in upper compartment Aerobic only Aerobic in lower compartment and anaerobic in upper compartment Anaerobic only anaerobic in lower compartment and aerobic in upper compartment ANSWER DOWNLOAD EXAMIANS APP
Environmental Engineering Air binding phenomena in rapid sand filters occur due to Mud ball formation Excessive negative head Higher turbidity in the effluent Low temperature Mud ball formation Excessive negative head Higher turbidity in the effluent Low temperature ANSWER DOWNLOAD EXAMIANS APP
Environmental Engineering The per capital consumption of a locality is affected by (i) Climatic conditions (ii) Quality of water (iii) Distribution pressure All (i), (ii) and (iii) Both (i) and (ii) Only (i) Both (i) and (iii) All (i), (ii) and (iii) Both (i) and (ii) Only (i) Both (i) and (iii) ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS