13 MARCH 2021 CURRENT AFFAIRS QUIZ

You are the administrator of Windows 2000 Server network. On each server you format a separate system partition and a separate boot partition as NTFS. Several months later you shut down one of the computers for maintenance. When you try to restart the computer you receive the following error message "NTLDR is missing, press any key to restart". You want to install a new NTLDR file on the computer but you do not want to loose any settings you made since the installation. What should you do?

Start the computer by using Windows 2000 bootable floppy disk. Run the file signature verification utility

None of above

Start the computer by using the Windows 2000 server CD- ROM, choose to reinstall. When the installation is complete copy the NTLDR to the root of the boot volume

Start the computer by using the Windows 2000 bootable floppy disk. From a command prompt run the sfc/scanboot command

Start the computer by using Windows 2000 Server computer CD-ROM and choose tools to repair the installation. Select recovery console and copy the NTLDR file on the CD-ROM to the root of the system vol

TRUE ANSWER : ?
YOUR ANSWER : ?

You have just configured two Windows NT Servers, Monitor 1 and Monitor 2 with no other software installed. You have an application server that needs to be monitored for performance to figure out what it's problem is, or to get some kind of baseline. You install Network Monitor on Monitor 2. What would you do to monitor Application server?

Install Network Monitor on Application Server

Configure Monitor 2 and Application server as monitoring partners (or something) to monitor the performance

Configure the network monitor EDP port something for UDP

Install Network Monitor on Monitor 1

Configure the network monitor ECP port something for TCP

TRUE ANSWER : ?
YOUR ANSWER : ?

You are the network administrator for your company. Mike Nash is a member of the Administration group, and Nate Sun is a member of the Intern group. Both groups are in the same domain. On the intranet server, the Administration group is placed in the Security group, and the Intern group is placed in the Nonsecurity group. The Security group is then granted Full Control permission for the Sales virtual directory. Nate needs to update new sales information that is located on the Sales virtual directory. What should you do so that Nate can perform this task?

Enable Anonymous access for the intranet server

Enable Anonymous access for the Sales virtual directory

Make Nate a member of the Security group

Remove Nate fmm the Intern group

None of above

TRUE ANSWER : ?
YOUR ANSWER : ?

You install Terminal Services on a Windows 2000 domain controller. You install Terminal Services Client on users' client computers. Users report that when they try to connect to the Terminal server, they receive the following error message: "The local policy of this system does not allow you to logon interactively." When you attempt to log on to the Terminal server as an administrator from a user's computer, you log on successfully. You want users to be able to log on to the Terminal server. What should you do?

Copy the users' prpfiles to the Terminal server

Copy the users' home folders to the Terminal server

Grant the users the right to log on locally

Grant the users the right to log on as a service

Grant the users the right to log on over the network

TRUE ANSWER : ?
YOUR ANSWER : ?

You are the administrator of a Windows 2000 Server network that runs in mixed mode. You install a new Windows 2000 Server computer. You create and share a new HP LaserJet 4L printer. Your Windows 2000 Professional client computers can print to the new printer successfully. However, when users try to connect to the printer from Windows NT Workstation 4.0 client computers, they receive the dialog box shown in the exhibit. "The server on which the printer resides does not have a suitable HP LaserJet printer driver installed". You want the printer driver to be installed automatically on the Windows NT Workstation computers. What should you do?

None of above

Copy the Windows NT 4.0 Printer Drivers to the Net logon shared folders on all Windows NT Server 4.0 computers still configured as BDCs

Change the sharing options on the printer to install additional drivers for Windows NT 4.0 or Windows 2000

Copy the Windows NT 4.0 printer drivers to the Net logon shared folder on the PDC emulator

Copy the Windows NT 4.0 printer drivers to the WinntSystem32 pri liter sdri vers folder on the Windows 2000 print server

TRUE ANSWER : ?
YOUR ANSWER : ?

You have configured a Group Policy Object (GPO) for the marketing oranization unit (OU) to prevent users from accessing My Network Places and from running System in Control Panel. You want the Managers Domain Local Group to be able to access My Network Places, but you still want to prevent them from running System in Control Panel. What should you do?

Create a second GPO in the OU. Add the Managers group to the access control list. Allow the managers group to apply the Group Policy. Deny the Authenticated Users group permission to read and apply th

Create a second GPO in the OU. Add the Managers group to the access control list. Allow the managers group to apply the Group Policy. Disable the Authenticated Users group permission to read and apply

Add the Managers group to the access control list of the GPO. Disable the permission of the managers group to read and apply the Group Policy

None of above

Add the Managers group to the access control list of the GPO. Deny the permission of the managers group to read and apply the Group Policy

TRUE ANSWER : ?
YOUR ANSWER : ?

How can you assign an application to one processor exclusively?

Right click on application executable, select properties and select assign processor

None of above.

Open Task Manager, chose options from task bar, select processor and assign processes to appropriate processor

Right click on application process in Task Manager, select Set Affinity, and select the appropriate processor

Open Task Manager, chose Performance, chose view all processors, assign processes to appropriate processor

TRUE ANSWER : ?
YOUR ANSWER : ?

You install a new multiple-process database application named Application on your Windows 2000 Server computer. Two days later, users begin to report that the new application has suddenly stopped responding to queries. You verify that the server is operation and decide that you need to restart the application. What should you do before you restart the application?

End the Application.exe process

None of above

End the task named Application

End both the Explorer.exe process and the Application.exe process

End the Application.exe process tree

TRUE ANSWER : ?
YOUR ANSWER : ?

Computer accounts and user accounts in your domain have been seperated into OUs for administrative purpose. You want to require strong passwords for the local user accounts only. What should you do?

None of above

Set a Group Policy on the domain to enable the passwords must meet complexity requirements policy

Set a Group Policy on each local computer to enable the passwords must meet complexity requirements policy

Set a Group Policy on all OUs containing computer accounts to enable the passwords must meet complexity requirements policy

Set a Group Policy on all OUs containing user accounts to enable the passwords must meet complexity requirements policy

TRUE ANSWER : ?
YOUR ANSWER : ?

Your network contains 10 domain controllers, 10 member servers, and approximately 1,000 client computers. All the servers run Windows 2000 Server, and all the client computers run Windows 2000 Professional. Two of the domain controllers act as DNS servers. Users of client computers use file sharing to grant access to files stored locally. The network has 10 subnets and uses TCP/IP as the only network protocol. You want to configure the network so that all computers can resolve the addresses of all other computers by using DNS. Client computers must be able to register and resolve addresses if a server fails. How should you configure the DNS servers?

Configure at least two servers with Active Directory integrated primary zones for the domain

Configure one server with a standard primary zone for the domain, and configure at least one server with an Active Directory integrated primary zone

Configure at least two servers with standard primary zones for the domain

Configure one server with a standard primary zone for the domain, and configure at least one server with standard secondary zone

Configure one server with an Active directory integrated primary zone for the domain, and configure at least one server with a standard secondary zone

TRUE ANSWER : ?
YOUR ANSWER : ?