Engineering Materials Maximum percentage of carbon in ferrite is 0.0006 0.001 0.0025 0.00025 0.0006 0.001 0.0025 0.00025 ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials In process annealing, the hypo eutectoid steel is Heated from 30°C to 50°C above the upper critical temperature and then cooled suddenly in a suitable cooling medium Heated from 30°C to 50°C above the upper critical temperature and then cooled slowly in the furnace Heated below or closes to the lower critical temperature and then cooled slowly Heated from 30°C to 50°C above the upper critical temperature and then cooled in still air Heated from 30°C to 50°C above the upper critical temperature and then cooled suddenly in a suitable cooling medium Heated from 30°C to 50°C above the upper critical temperature and then cooled slowly in the furnace Heated below or closes to the lower critical temperature and then cooled slowly Heated from 30°C to 50°C above the upper critical temperature and then cooled in still air ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials Gamma-iron occurs between the temperature ranges of 600°C to 900°C 1400°C to 1530°C 400°C to 600°C 900°C to 1400°C 600°C to 900°C 1400°C to 1530°C 400°C to 600°C 900°C to 1400°C ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials Eutectoid reaction occurs at 600°C 1493°C 723°C 1147°C 600°C 1493°C 723°C 1147°C ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials A reversible change in the atomic structure of steel with corresponding change in the properties is known as Solidus change Allotropic change Molecular change Physical change Solidus change Allotropic change Molecular change Physical change ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials Which of the following impurity in cast iron promotes graphite nodule formation and increases the fluidity of the molten metal? Silicon Sulphur Phosphorus Manganese Silicon Sulphur Phosphorus Manganese ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS