Manufacturing And Production Technology Which among the NC operations given below are continuous path operations?Arc Welding (AW), Drilling (D), Laser Cutting of Sheet Metal (LC), Milling (M), Punching in Sheet Metal (P), Spot Welding (SW) D, LC, and SW AW, LC and M AW, D, LC and M D, LC, P and SW D, LC, and SW AW, LC and M AW, D, LC and M D, LC, P and SW ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The material property which depends only on the basic crystal structure is Fatigue strength Work hardening Elastic constant Fracture strength Fatigue strength Work hardening Elastic constant Fracture strength ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The primary purpose of a sprue in a casting mould is to Feed the casting at a rate consistent with the rate of solidification Help feed the casting until all solidification takes place Act as a reservoir for molten metal Feed molten metal from the pouring basin to the gate Feed the casting at a rate consistent with the rate of solidification Help feed the casting until all solidification takes place Act as a reservoir for molten metal Feed molten metal from the pouring basin to the gate ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology A CNC vertical milling machine has to cut a straight slot of 10 mm width and 2 mm depth by a cutter of 10 mm diameter between points (0,0) and (100,100) on the XY plane (dimensions in mm). The feed rate used for milling is 50 mm/min, milling time for the slot (in seconds) is 120 240 170 180 120 240 170 180 ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The lip angle of a single point tool is usually None of these 40° to 60° 60° to 80° 20° to 40° None of these 40° to 60° 60° to 80° 20° to 40° ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS