Process Control and Instrumentation Load cells are used for the measurement of Stress Strain Velocity Weight Stress Strain Velocity Weight ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation The transfer function of a process is 1/(16s² + 8s + 4). If a step change is introduced into the system, then the response will be Critically damped None of these Over damped Under damped Critically damped None of these Over damped Under damped ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation Phase lag of the frequency response of a second order system to a sinusoidal forcing function Approaches 180° asymptotically Is 120° Is 90° at the most Is 30° Approaches 180° asymptotically Is 120° Is 90° at the most Is 30° ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation A system with transfer function (2S/4S) + 1 is of __________ order. 2nd 3rd 1st Zero 2nd 3rd 1st Zero ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation For increased speed of response of an expansion pressure spring thermometer, the thermometer bulb should have a Small specific heat High thermal conductivity All of these Large area but small mass Small specific heat High thermal conductivity All of these Large area but small mass ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation Which of the following is an undesirable dynamic characteristic of an instrument? Dead zone Static error Reproducibility Time lag Dead zone Static error Reproducibility Time lag ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS