Process Control and Instrumentation A system with transfer function (2S/4S) + 1 is of __________ order. Zero 3rd 1st 2nd Zero 3rd 1st 2nd ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation E.m.f. generated by thermocouples is of the order of Millivolts Volts Microvolts Kilo volts Millivolts Volts Microvolts Kilo volts ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation If response of a control system is to be free of offset and oscillation, the most suitable controller is Proportional-derivative(PD)controller Proportional-integral (PI) controller Proportional integral-derivative (PID) controller Proportional controller Proportional-derivative(PD)controller Proportional-integral (PI) controller Proportional integral-derivative (PID) controller Proportional controller ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation Dead zone is the Maximum change in the variable that does not change the reading of the instrument None of these Same as time constant Same as transportation lag Maximum change in the variable that does not change the reading of the instrument None of these Same as time constant Same as transportation lag ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation Which of the following thermocouples will give the highest output for the same value of hot and cold junction temperature? Iron-constantan All of these Platinum-platinum + rhodium Chromel-constantan Iron-constantan All of these Platinum-platinum + rhodium Chromel-constantan ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation Dead zone in an instrument must be less than __________ percent of the scale. 0.2 8 4 1.5 0.2 8 4 1.5 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS