Workshop Technology In ___ welding, the weld may be made either from left to right or from right to left. Forehand None of the listed here Vertical Backhand Forehand None of the listed here Vertical Backhand ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The property of sand due to which it evolves a great amount of steam and other gases is called Adhesiveness Cohesiveness Permeability Collapsibility Adhesiveness Cohesiveness Permeability Collapsibility ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology During drawing operation, the states of stress in cup would include Compressive stress in the flange Both (A) and (B) None of these Tensile stress in the wall Compressive stress in the flange Both (A) and (B) None of these Tensile stress in the wall ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology Seam welding is best adopted for metal thickness ranging from 8 to 10 mm 5 to 8 mm 0.025 to 3 mm 3 to 5 mm 8 to 10 mm 5 to 8 mm 0.025 to 3 mm 3 to 5 mm ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The edge of a steel plate cut by oxygen cutting will get hardened when the carbon content is Less than 0.3 percent More than 0.3 percent Anywhere between 0.1 to 1 percent Less than 0.1 percent Less than 0.3 percent More than 0.3 percent Anywhere between 0.1 to 1 percent Less than 0.1 percent ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The metal patterns as compared to wooden patterns require less Shrinkage allowance Machining allowance Distortion allowance Draft allowance Shrinkage allowance Machining allowance Distortion allowance Draft allowance ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS