Workshop Technology A rip saw Is used for cutting along the grains of wood Is a two man saw All of these Has a narrow blade with two wooden handles Is used for cutting along the grains of wood Is a two man saw All of these Has a narrow blade with two wooden handles ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology In a ___, the molten metal is poured and allowed to solidify while the mould is revolving. Permanent mould casting method Centrifugal casting method Die casting method Slush casting method Permanent mould casting method Centrifugal casting method Die casting method Slush casting method ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The tolerance produced by shell moulding process of casting is +0.05 mm ±0.2 mm ±1 mm +0.5 mm +0.05 mm ±0.2 mm ±1 mm +0.5 mm ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology In electric resistance welding, pressure applied varies from 5 to 10 MPa 25 to 55 MPa 10 to 25 MPa 1 to 5 MPa 5 to 10 MPa 25 to 55 MPa 10 to 25 MPa 1 to 5 MPa ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology For welding plates of thickness less than 5 mm, its edges Should have a double-V or U-groove on both sides Do not require bevelling Should have a double-V or U-groove on one side Should be bevelled to a single-V or U-groove Should have a double-V or U-groove on both sides Do not require bevelling Should have a double-V or U-groove on one side Should be bevelled to a single-V or U-groove ANSWER DOWNLOAD EXAMIANS APP
Workshop Technology The recrystallisation temperature of steel is 400°C 600°C 800°C None of these 400°C 600°C 800°C None of these ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS