Electrical Machines In DC generator, brushes are always placed along geometrical neutral axis. magnetic neutral axis. armature axis. load axis. geometrical neutral axis. magnetic neutral axis. armature axis. load axis. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Eg (generated emf) and Eb (back emf) both are none of above. different. same. changes. none of above. different. same. changes. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines The result of slip test on a 3-phase, 20 KVA, 400 V, 50 Hz connected salient pole alternator is given below- Phase value: Vmax = 100 V, Vmin = 96 V, Imax = 10 A and I min = 7 A. The direct and quadranature axis reactances are respectively 8.248 and 9.60 Ω. 8.248 and 5.54 Ω. 14.28 and 9.60 Ω. 14.28 and 5.54 Ω. 8.248 and 9.60 Ω. 8.248 and 5.54 Ω. 14.28 and 9.60 Ω. 14.28 and 5.54 Ω. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Two mechanically coupled alternators deliver power at 50 Hz and 60 Hz respectively. Highest speed of alternator is 600 rpm. 3600 rpm. 3000 rpm. 500 rpm. 600 rpm. 3600 rpm. 3000 rpm. 500 rpm. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines The armature core of the rotor bars of dc motors are laminated to reduce eddy current loss. to reduce mechanical losses. to provide better flux linkage. to reduce hysteresis loss. to reduce eddy current loss. to reduce mechanical losses. to provide better flux linkage. to reduce hysteresis loss. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Which of the following motors is/are widely used? None of these either of these squirrel cage induction motor slip ring induction motor None of these either of these squirrel cage induction motor slip ring induction motor ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS