Electrical Machines A single phase transformer has specifications as 250 KVA, 11000 V/415 V, 50 Hz. What are the values of primary and secondary currents? primary = 22.7 A, secondary = 602.4 A primary = 602 A, secondary = 22.7 A primary = 301 A, secondary = 22.7 A primary = 11.4 A, secondary = 301 A primary = 22.7 A, secondary = 602.4 A primary = 602 A, secondary = 22.7 A primary = 301 A, secondary = 22.7 A primary = 11.4 A, secondary = 301 A ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Which of the following is/are the methods to reduce the armature reaction and its effects? All of these compensating winding pole chamfering pole stacking All of these compensating winding pole chamfering pole stacking ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines The slight curvature at the lower end of the OCC of a self excited DC generator is due to high speed. residual flux. magnetic inertia. high field resistance. high speed. residual flux. magnetic inertia. high field resistance. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A 4 pole dynamo with wave wound armature has 51 slots contains 20 conductors in each slot. If induced emf 357 Volts and speed is 8500 rpm, flux per pole will be 2.7 mWb. 1.4 mWb. 3.5 mWb. 1.2 mWb. 2.7 mWb. 1.4 mWb. 3.5 mWb. 1.2 mWb. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines In case of 3 - Φ IM, plugging means locking of rotor due to harmonics. interchanging two supply phases for quick stopping. pulling the motor directly on line without a rotor. starting the motor on load which is more than the rated load. locking of rotor due to harmonics. interchanging two supply phases for quick stopping. pulling the motor directly on line without a rotor. starting the motor on load which is more than the rated load. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines The supply voltage to an induction motor is reduced by 10%. By what percentage, approximately, will the maximum torque decrease? 10% 19% 5% 40% 10% 19% 5% 40% ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS