Electrical Machines In a transformer, hysteresis and eddy current losses depend upon supply frequency maximum flux density both 2 and 3 load current supply frequency maximum flux density both 2 and 3 load current ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A 250 V DC generator in run at rated speed with no excitation. The open circuit voltage will be about 100 V. zero. 250 V. very small, say about 2 or 3 V. about 100 V. zero. 250 V. very small, say about 2 or 3 V. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines The rotor slots are slightly skewed in squirrel cage induction motor to increase the strength of rotor bars. provide ease of fabrication. decrease the amount of copper to be used. reduce the magnetic hum and locking tendency of rotor. increase the strength of rotor bars. provide ease of fabrication. decrease the amount of copper to be used. reduce the magnetic hum and locking tendency of rotor. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Maximum allowable tan - delta (tanδ) of dielectric dispassion factor of power transformer insulating oil is generally taken as 3 at 90°C. 2 at 90°C. 0.5 at 90°C. 1 at 90°C. 3 at 90°C. 2 at 90°C. 0.5 at 90°C. 1 at 90°C. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Under which of the following conditions hunting of synchronous motor is likely to occur ? Periodic variation of load. Small and constant load. Over-loading for long period. Over-excitation. Periodic variation of load. Small and constant load. Over-loading for long period. Over-excitation. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines R1 is the resistance of the primary winding of the transformer. The turn ratio in terms of primary to secondary is K. Then the equivalent resistance of the primary referred to secondary is K×R1 R1 /K² K²R1 R1 /K K×R1 R1 /K² K²R1 R1 /K ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS