Computer Networking How many digits of the DNIC (Data Network Identification Code) identify the country? first five first three first four first six None of these first five first three first four first six None of these ANSWER DOWNLOAD EXAMIANS APP
Computer Networking A 4 KHz noiseless channel with one sample every 125 per sec, is used to transmit digital signals. Find the bit rate (bits per second) that are sent, if CCITT 2.048 Mbps encoding is used. 32 Kbps 64 Kbps None of these 8 Kbps 500 Kbps 32 Kbps 64 Kbps None of these 8 Kbps 500 Kbps ANSWER DOWNLOAD EXAMIANS APP
Computer Networking You have a Cisco mesh network. What protocol allows multiple APs to connect with many redundant connections between nodes? AWPP IEEE LWAPP STP AWPP IEEE LWAPP STP ANSWER DOWNLOAD EXAMIANS APP
Computer Networking You want to run the new 802.1w on your switches. Which of the following would enable this protocol? Switch# spanning-tree mode rapid-pvst Switch# spanning-tree mode 802.1w Switch(config)# spanning-tree mode rapid-pvst Switch(config)# spanning-tree mode 802.1w Switch# spanning-tree mode rapid-pvst Switch# spanning-tree mode 802.1w Switch(config)# spanning-tree mode rapid-pvst Switch(config)# spanning-tree mode 802.1w ANSWER DOWNLOAD EXAMIANS APP
Computer Networking You have the following routing table. Which of the following networks will not be placed in the neighbor routing table?R 192.168.30.0/24 [120/1] via 192.168.40.1, 00:00:12, Serial0C 192.168.40.0/24 is directly connected, Serial0 172.16.0.0/24 is subnetted, 1 subnetsC 172.16.30.0 is directly connected, Loopback0R 192.168.20.0/24 [120/1] via 192.168.40.1, 00:00:12, Serial0R 10.0.0.0/8 [120/15] via 192.168.40.1, 00:00:07, Serial0C 192.168.50.0/24 is directly connected, Ethernet0 172.16.30.0 192.168.30.0 All of them will be placed in the neighbor routing table 10.0.0.0 172.16.30.0 192.168.30.0 All of them will be placed in the neighbor routing table 10.0.0.0 ANSWER DOWNLOAD EXAMIANS APP
Computer Networking If a switch receives a frame and the source MAC address is not in the MAC address table but the destination address is, what will the switch do with the frame? Discard it and send an error message back to the originating host Add the destination to the MAC address table and then forward the frame Flood the network with the frame Add the source address and port to the MAC address table and forward the frame out the destination port Discard it and send an error message back to the originating host Add the destination to the MAC address table and then forward the frame Flood the network with the frame Add the source address and port to the MAC address table and forward the frame out the destination port ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS