Manufacturing And Production Technology For machining a cast iron workpiece by a high speed steel tool, the average cutting speed is 30 m/min 10 m/min 15 m/min 22 m/min 30 m/min 10 m/min 15 m/min 22 m/min ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The tap used to cut threads in a blind hole is Second tap Taper tap Any one of these Bottoming tap Second tap Taper tap Any one of these Bottoming tap ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The hole to be drilled for tapping is _________ the outside diameter of the thread on the tap. Smaller than None of the listed here Equal to Greater than Smaller than None of the listed here Equal to Greater than ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The factor considered for evaluation of machinability is Tool life Cutting forces and power consumption Type of chips and shear angle All of these Tool life Cutting forces and power consumption Type of chips and shear angle All of these ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The lip clearance angle is the angle formed by the Leading edge of the land with a plane having the axis of the drill Chisel edge and the lip as viewed from the end of a drill Flank and a plane at right angles to the drill axis None of the listed here Leading edge of the land with a plane having the axis of the drill Chisel edge and the lip as viewed from the end of a drill Flank and a plane at right angles to the drill axis None of the listed here ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In an interchangeable assembly, shafts of size 25.000 -0.0100⁺⁰∙⁰⁴⁰ mm mate with holes of size 25.000 -0.010⁺⁰∙⁰²⁰ mm. The maximum possible clearance in the assembly will be 60 microns 20 microns 10 microns 30 microns 60 microns 20 microns 10 microns 30 microns ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS