Manufacturing And Production Technology The lip clearance angle is the angle formed by the Leading edge of the land with a plane having the axis of the drill None of the listed here Flank and a plane at right angles to the drill axis Chisel edge and the lip as viewed from the end of a drill Leading edge of the land with a plane having the axis of the drill None of the listed here Flank and a plane at right angles to the drill axis Chisel edge and the lip as viewed from the end of a drill ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In centreless grinding, work place centre will be Above the line joining the two wheel centres Below the line joining the two wheel centres On the line joining the two wheel centres At the intersection of the line joining the wheel centres with the work place plane Above the line joining the two wheel centres Below the line joining the two wheel centres On the line joining the two wheel centres At the intersection of the line joining the wheel centres with the work place plane ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology A ring gauge is used to measure Both outside diameter and roundness Outside diameter but not roundness Only external threads Roundness but not outside diameter Both outside diameter and roundness Outside diameter but not roundness Only external threads Roundness but not outside diameter ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology A solid cylinder of diameter 100 mm and height 50 mm is forged between two frictionless flat dies to a height of 25 mm. The percentage change in diameter is 2.07 41.4 20.7 2.07 41.4 20.7 ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The helix angle of a drill is ___ for drilling brass. More than 30° None of the listed here Equal to 30° Less than 30° More than 30° None of the listed here Equal to 30° Less than 30° ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The actual feed in centerless grinders is given by (where d = Dia. of regulating wheel, n = Revolutions per minute, and α = Angle of inclination of wheel) πdn πdn cosα πdn sinα πd πdn πdn cosα πdn sinα πd ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS