Galvanized steel conductors do not corrode, and possess high resistance. Hence such Wires are used in telecommunications circuits, earth wires, guard wire, stray wire, etc.
In electrical engineering, the power factor of an AC electrical power system is defined as the ratio of the real power flowing to the load to the apparent power in the circuit ” R/Z”.
P = ρ QHg is the water power equation. Where H = heead = meter g = gravity =m/s2 ρ =density = (kg/m3) P = power = watt = N-m/sec Q = water flow rate = m3/sec
During the positive half cycle of the supply, diodes D1 and D2 conduct are forward biased and conduct current while diodes D3 and D4 are reverse biased and they act as an open circuit, the current flows through the load.
The luminous efficiency of an electric lamp is the ratio of the luminous flux (in lumen) emitted by the lamp to the electric power (watt) given to it i.e. Luminous efficiency η = Luminous flux/Watt Note:- Lumens is the unit of measurement for luminous flux, which is the total amount of visible light emitted by a source. 1
EXAMIANS