Petroleum Refinery Engineering Catalyst used in the isomerisation is Phosphoric acid Aluminium chloride Alumina Nickel Phosphoric acid Aluminium chloride Alumina Nickel ANSWER DOWNLOAD EXAMIANS APP
Petroleum Refinery Engineering Casing head gasoline is the liquid Natural gas Gasoline separated from wet natural gas by compression Butane Propane Natural gas Gasoline separated from wet natural gas by compression Butane Propane ANSWER DOWNLOAD EXAMIANS APP
Petroleum Refinery Engineering During electrical desalting of crude oil, the electrical conductivity of a mixture of crude oil and water (which ranges between 3 to 8% water) __________ with increase in the amount of water. Decreases Decreases linearly Remains unchanged Increases Decreases Decreases linearly Remains unchanged Increases ANSWER DOWNLOAD EXAMIANS APP
Petroleum Refinery Engineering Operating temperature and pressure in catalytic reforming is about 15-45 Kgf/cm² & 450-550°C 50 - 75 kgf/cm² & 600 - 800°C 5-10 kgf/cm² & 150 - 250°C 1-5 Kgf/cm² & 200°C 15-45 Kgf/cm² & 450-550°C 50 - 75 kgf/cm² & 600 - 800°C 5-10 kgf/cm² & 150 - 250°C 1-5 Kgf/cm² & 200°C ANSWER DOWNLOAD EXAMIANS APP
Petroleum Refinery Engineering Solvent used in duo-sol extraction for lube oil upgradation is a mixture of Methyl ethyl ketone & glycol Phenol & furfural Propane & liquid sulphur dioxide Propane & phenol-cresol mixture Methyl ethyl ketone & glycol Phenol & furfural Propane & liquid sulphur dioxide Propane & phenol-cresol mixture ANSWER DOWNLOAD EXAMIANS APP
Petroleum Refinery Engineering A typical yield of kerosene in straight run distillation of crude oil may be about __________ percent. 10 18 26 4 10 18 26 4 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS