Power Systems A diesel power plant is generally used as a/an Peak loads. Any of above. Standby/emergency plant. Base load. Peak loads. Any of above. Standby/emergency plant. Base load. ANSWER DOWNLOAD EXAMIANS APP
Power Systems If, for a given alternator in economic operation mode, the incremental cost is given by (0.012 P + 8) Rs/MWh, dPL/dP = 0.2 and plant λ = 25, then power generation is 1000 MW 750 MW 1500 MW 1250 MW 1000 MW 750 MW 1500 MW 1250 MW ANSWER DOWNLOAD EXAMIANS APP
Power Systems Three generators rated 100 MVA, 11 kV have an impedance of 0.15 pu each. If in the same plant, these generators are being replaced by a single equivalent generator, the effective impedance of equivalent generator will be 0.15 pu 0.25 pu 0.05 pu 0.45 pu 0.15 pu 0.25 pu 0.05 pu 0.45 pu ANSWER DOWNLOAD EXAMIANS APP
Power Systems A lossless power system has to serve a load of 250 MW. There are two generators(G1 and G2) in the system with cost curves C1 and C2 respectively defined as follows: C1 = PG1+0.055P²G1 C2 = 3 PG2 + 0.03 P²G2 Where PG1 and PG2 are the MW injections from generators G1 and G2 respectively. Thus, the minimum cost dispatch will be PG1 = 250 MW and PG2 = 0 MW PG1 = 150 MW and PG2 = 100 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 0 MW and PG2 = 250 MW PG1 = 250 MW and PG2 = 0 MW PG1 = 150 MW and PG2 = 100 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 0 MW and PG2 = 250 MW ANSWER DOWNLOAD EXAMIANS APP
Power Systems Sum of the elements of row i equal to shunt admittances connected to bus i. If this summation is zero, indicates there is no shunt admittance None of these both 1 and 2 mutual coupling shunt admittance None of these both 1 and 2 mutual coupling ANSWER DOWNLOAD EXAMIANS APP
Power Systems If the rated receiving end voltage is 33 kV, then what are the limits for safe operation of equipments? 31.35 to 34.65 kV 25 to 35 kV 33 to 50 kV any voltage above 33 kV 31.35 to 34.65 kV 25 to 35 kV 33 to 50 kV any voltage above 33 kV ANSWER DOWNLOAD EXAMIANS APP