Machine Design A chain drive transmits __________ power as compared to belt drive. More Less None of these Same More Less None of these Same ANSWER DOWNLOAD EXAMIANS APP
Machine Design The wire ropes make contact at Anywhere in the groove of the pulley Sides and bottom of groove of the pulley Sides of groove of the pulley Bottom of groove of the pulley Anywhere in the groove of the pulley Sides and bottom of groove of the pulley Sides of groove of the pulley Bottom of groove of the pulley ANSWER DOWNLOAD EXAMIANS APP
Machine Design When an open coiled helical compression spring is subjected to an axial compressive load, the maximum shear stress induced in the wire is (where D = Mean diameter of the spring coil, d = Diameter of the spring wire, K = Wahl's stress factor, and W = Axial compressive load on the spring) (8WD/ πd3) × K (WD/ πd3) × K (2WD/ πd3) × K (4WD/ πd3) × K (8WD/ πd3) × K (WD/ πd3) × K (2WD/ πd3) × K (4WD/ πd3) × K ANSWER DOWNLOAD EXAMIANS APP
Machine Design Stress concentration is caused due to Pitting at points or areas at which loads on a member are applied Variation in properties of material from point to point in a member All of these Abrupt change of section Pitting at points or areas at which loads on a member are applied Variation in properties of material from point to point in a member All of these Abrupt change of section ANSWER DOWNLOAD EXAMIANS APP
Machine Design A long helical spring having a spring stiffness of 12 kN/m and number of turns 20, breaks into two parts with number of turns 10 each in both the parts. If the two parts are connected in series, then the softness of the resultant spring will be 12 kN/m 24 kN/m 30 kN/m 6 kN/m 12 kN/m 24 kN/m 30 kN/m 6 kN/m ANSWER DOWNLOAD EXAMIANS APP
Machine Design The period during which the cam follower remains at rest, when cam moves, is known as Dwell period Idle period Constant period Fixed period Dwell period Idle period Constant period Fixed period ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS