Engineering Materials Which of the following when used in ordinary low carbon steels, makes the metal ductile and of good bending qualities? Silicon Manganese Phosphorus Sulphur Silicon Manganese Phosphorus Sulphur ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials The percentage of carbon in low carbon steel is 0.15% 0.3% 0.5% 0.05% 0.15% 0.3% 0.5% 0.05% ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials The lower critical temperature Decreases as the carbon content in steel increases Is same for all steels Increases as the carbon content in steel increases Depends upon the rate of heating Decreases as the carbon content in steel increases Is same for all steels Increases as the carbon content in steel increases Depends upon the rate of heating ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials In the lower part of the blast furnace (zone of fusion), the temperature is 1500°C to 1700°C 800°C to 1000°C 1200°C to 1300°C 400° to 700°C 1500°C to 1700°C 800°C to 1000°C 1200°C to 1300°C 400° to 700°C ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials The charge is fed into the blast furnace through the Throat Bosh Stack Tyres Throat Bosh Stack Tyres ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials The unit cells Have the same orientation and their similar faces are parallel All of these Contain the smallest number of atoms which when taken together have all the properties of the crystals of the particular metal May be defined as the smallest parallelepiped which could be transposed in three coordinate directions to build up the space lattice Have the same orientation and their similar faces are parallel All of these Contain the smallest number of atoms which when taken together have all the properties of the crystals of the particular metal May be defined as the smallest parallelepiped which could be transposed in three coordinate directions to build up the space lattice ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS