Power Systems Which of the following method is/are more reliable? Gauss-Siedel (GS) method All of these Fast Decoupled Load Flow (FDLF) method Newton Raphson (NR) method Gauss-Siedel (GS) method All of these Fast Decoupled Load Flow (FDLF) method Newton Raphson (NR) method ANSWER DOWNLOAD EXAMIANS APP
Power Systems Advantages of shunt compensation is/are smooth voltage regulation is possible by controlling excitation single unit can be used as both capacitance and inductor by adjusting the excitation All of these It requires less maintanance smooth voltage regulation is possible by controlling excitation single unit can be used as both capacitance and inductor by adjusting the excitation All of these It requires less maintanance ANSWER DOWNLOAD EXAMIANS APP
Power Systems The value of inductance used for compensation of arcing grounds is 3ω²C 3/ω²C 1/3ω²C ω²C/3 3ω²C 3/ω²C 1/3ω²C ω²C/3 ANSWER DOWNLOAD EXAMIANS APP
Power Systems The unit protection scheme provides primary protection. remote protection. simultaneous protection. back up protection. primary protection. remote protection. simultaneous protection. back up protection. ANSWER DOWNLOAD EXAMIANS APP
Power Systems Suspension type insulators are used for voltage beyond 440 V 11 kV 33 kV 230 V 440 V 11 kV 33 kV 230 V ANSWER DOWNLOAD EXAMIANS APP
Power Systems A lossless power system has to serve a load of 250 MW. There are two generators(G1 and G2) in the system with cost curves C1 and C2 respectively defined as follows: C1 = PG1+0.055P²G1 C2 = 3 PG2 + 0.03 P²G2 Where PG1 and PG2 are the MW injections from generators G1 and G2 respectively. Thus, the minimum cost dispatch will be PG1 = 0 MW and PG2 = 250 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 150 MW and PG2 = 100 MW PG1 = 250 MW and PG2 = 0 MW PG1 = 0 MW and PG2 = 250 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 150 MW and PG2 = 100 MW PG1 = 250 MW and PG2 = 0 MW ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS