Power Systems Which of the following is/are the methods of improving transient stability? Fast acting excitation control Dynamic breaking All of these Fast acting governing system Fast acting excitation control Dynamic breaking All of these Fast acting governing system ANSWER DOWNLOAD EXAMIANS APP
Power Systems Which one of the following relays has the capability of anticipating the possible major fault in a transformer? Over current relay Differential relay Over fluxing relay Buchholz relay Over current relay Differential relay Over fluxing relay Buchholz relay ANSWER DOWNLOAD EXAMIANS APP
Power Systems The VSWR of transmission line is Directly proportional to voltage minimum and inversely proportional to voltage maximum. Directly proportional to characteristic impedance and inversely to load impedance. Directly proportional to load impedance and inversely to characteristic impedance. Proportional to load and characteristic impedance. Directly proportional to voltage minimum and inversely proportional to voltage maximum. Directly proportional to characteristic impedance and inversely to load impedance. Directly proportional to load impedance and inversely to characteristic impedance. Proportional to load and characteristic impedance. ANSWER DOWNLOAD EXAMIANS APP
Power Systems The function of moderator in a nuclear reactor is to absorb the excess. to slow down the neutrons. All of these to increase the energy of the neutrons. to absorb the excess. to slow down the neutrons. All of these to increase the energy of the neutrons. ANSWER DOWNLOAD EXAMIANS APP
Power Systems A 3-phase transmission line operating at Vs = 400 kV and has ABCD parameters A= D = 0.8∠0°, B = 100∠°90 Ω, C = 0.5*10^-6∠90° ℧. Find Charging current under no load? 0.344∠90° A/phase 0.512∠90° A/phase 1.144∠90° A/phase 0.144∠90° A/phase 0.344∠90° A/phase 0.512∠90° A/phase 1.144∠90° A/phase 0.144∠90° A/phase ANSWER DOWNLOAD EXAMIANS APP
Power Systems Incremental cost of two generators Ic1 = 0.2 P1+60, Ic2 = 0.3 P2+40 and the ratings of the generator are 150 and 250 MW. Find the load sharing of each generator for a load of 200 MW? P1 = 100 MW, P2 = 100 MW P1 = 60 MW, P2 = 140 MW P1 = 80 MW, P2 = 120 MW P1 = 120 MW, P2 = 80 MW P1 = 100 MW, P2 = 100 MW P1 = 60 MW, P2 = 140 MW P1 = 80 MW, P2 = 120 MW P1 = 120 MW, P2 = 80 MW ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS