Automation System Which of the following is required for a plotter to perform specific commands? Driver Hardware Firmware Software None of these Driver Hardware Firmware Software None of these ANSWER DOWNLOAD EXAMIANS APP
Automation System Programmable controllers: (a) and (c) above are widely used in many different industries are programmed using relay ladder logic cannot perform functions other than relay logic None of these (a) and (c) above are widely used in many different industries are programmed using relay ladder logic cannot perform functions other than relay logic None of these ANSWER DOWNLOAD EXAMIANS APP
Automation System D/A (digital to analog) conversion: results in a binary code as the final output must be fed through a filter to reproduce the original signal accurately None of these both (b) and (c) has to be sampled at 1/2 the highest input frequency results in a binary code as the final output must be fed through a filter to reproduce the original signal accurately None of these both (b) and (c) has to be sampled at 1/2 the highest input frequency ANSWER DOWNLOAD EXAMIANS APP
Automation System Which of the following devices could be part of a sensor? brake clutch. relay None of these thermometer brake clutch. relay None of these thermometer ANSWER DOWNLOAD EXAMIANS APP
Automation System If a sine wave has a frequency of 500 Hz, the period in seconds of the sine wave is: 5000 0.02 0.002. None of these 0.003 5000 0.02 0.002. None of these 0.003 ANSWER DOWNLOAD EXAMIANS APP
Automation System The accuracy of a pick-and-place robot can be as good as: + 0.05 inches 0.008 inches 3% None of these + 0.0005 inches + 0.05 inches 0.008 inches 3% None of these + 0.0005 inches ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS