Power Systems Which of the following is not base load power plant Run water. Diesel. Nuclear. Pump storage. Run water. Diesel. Nuclear. Pump storage. ANSWER DOWNLOAD EXAMIANS APP
Power Systems A generating station has a maximum demand of 50 MW a load factor of 60 %, a plant capacity factor of 45 % and if the plant while running as per schedule were fully loaded. The daily energy produced will be 740 MW. 720 MW. 730 MW. 710 MW. 740 MW. 720 MW. 730 MW. 710 MW. ANSWER DOWNLOAD EXAMIANS APP
Power Systems The ratio of reset to pick up current for an induction cup relay is approximately 1.35. 0.75. 1.0. 0.99. 1.35. 0.75. 1.0. 0.99. ANSWER DOWNLOAD EXAMIANS APP
Power Systems The incremental fuel costs for two generating units G1 and G2 are given by Ic1 = 25 + 0.2 PG1 and Ic2 = 32 + 0.2 PG2, where PG1 and PG2 are real powers generated by the units. The economic allocation for a total load of 250 MW, neglecting transmission loss, is given by PG1 = 125 MW and PG2 = 125 MW PG1 = 142.5 MW and PG2 = 107.5 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 109.75 MW and PG2 = 140.25 MW PG1 = 125 MW and PG2 = 125 MW PG1 = 142.5 MW and PG2 = 107.5 MW PG1 = 100 MW and PG2 = 150 MW PG1 = 109.75 MW and PG2 = 140.25 MW ANSWER DOWNLOAD EXAMIANS APP
Power Systems The value of inductance used for compensation of arcing grounds is ω²C/3 1/3ω²C 3ω²C 3/ω²C ω²C/3 1/3ω²C 3ω²C 3/ω²C ANSWER DOWNLOAD EXAMIANS APP
Power Systems Bonding is done at the both ends of the cable to reduce the None of these copper loss sheath loss iron loss None of these copper loss sheath loss iron loss ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS