Furnace Technology Which of the following furnaces will have maximum thermal efficiency? Boiler furnace Rotary kilns Soaking pits Walking beam reheating furnace Boiler furnace Rotary kilns Soaking pits Walking beam reheating furnace ANSWER DOWNLOAD EXAMIANS APP
Furnace Technology In practical operation of any furnace, zero oxygen percentage or theoretical CO₂ percentage in flue gas is rarely achieved, because of Use of excessive positive draft in the furnace Use of pulverised solid fuels Imperfect mixing of fuel & air and infiltration of air Use of non-preheated combustion air Use of excessive positive draft in the furnace Use of pulverised solid fuels Imperfect mixing of fuel & air and infiltration of air Use of non-preheated combustion air ANSWER DOWNLOAD EXAMIANS APP
Furnace Technology Regenerators are installed in Both A & B Coke ovens Open hearth furnace Neither A nor B Both A & B Coke ovens Open hearth furnace Neither A nor B ANSWER DOWNLOAD EXAMIANS APP
Furnace Technology Decarburisation of steel Affects its crystalline structure Is favoured by CO₂ Is the removal of carbon from iron carbide (Fe₃C) All of these Affects its crystalline structure Is favoured by CO₂ Is the removal of carbon from iron carbide (Fe₃C) All of these ANSWER DOWNLOAD EXAMIANS APP
Furnace Technology To reduce the stack loss, heat recovery from flue gas can be done by All of these Steam generation in waste heat boilers Preheating of cold stock Preheating of combustion air All of these Steam generation in waste heat boilers Preheating of cold stock Preheating of combustion air ANSWER DOWNLOAD EXAMIANS APP
Furnace Technology Calcination of limestone to produce lime is done in a __________ kiln. Tunnel Vertical shaft Both B and C Rotary Tunnel Vertical shaft Both B and C Rotary ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS