Engineering Materials Which is false statement about annealing? Annealing is done to Relieve stresses Soften material Improve machining characteristic Harden steel slightly Relieve stresses Soften material Improve machining characteristic Harden steel slightly ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials The strength is the ability of a material to resist Externally applied forces with breakdown or yielding Fracture due to high impact loads Deformation under stress None of these Externally applied forces with breakdown or yielding Fracture due to high impact loads Deformation under stress None of these ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials When steel containing less than 0.8% carbon is cooled slowly from temperatures above or within the critical range, it consists of Mainly ferrite Pearlite and cementite Ferrite and pearlite Mainly pearlite Mainly ferrite Pearlite and cementite Ferrite and pearlite Mainly pearlite ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials Tensile strength of steel can be safely increased by Adding carbon up to 2.8% Adding carbon up to 6.3% Adding small quantities of copper Adding carbon up to 0.83% Adding carbon up to 2.8% Adding carbon up to 6.3% Adding small quantities of copper Adding carbon up to 0.83% ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials Which of the following has a fine gold colour and is used for imitation jewellery? Gun metal Silicon bronze Babbitt metal Aluminium bronze Gun metal Silicon bronze Babbitt metal Aluminium bronze ANSWER DOWNLOAD EXAMIANS APP
Engineering Materials For the allotropic forms of iron, the points of arrest are Constant for all metals The points where there is no further flow of metal The points where no further change occurs The points of discontinuity Constant for all metals The points where there is no further flow of metal The points where no further change occurs The points of discontinuity ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS