Measurement and Instrumentation Two voltmeters have the same range 0-400V. The internal impedance are 30,000 Ohms and 20,000 Ohms. If they are connected in series and 600V be applied across them, the readings are 300V each 400V and 200V One of the meters out of the range and other 100V 360V and 240V 300V each 400V and 200V One of the meters out of the range and other 100V 360V and 240V ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The chemical effect of current is used in C. ammeter hour meter None of these C. ammeter C. energy meter C. ammeter hour meter None of these C. ammeter C. energy meter ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Which one of the following meters has maximum loading effect on the circuit under measurement ? 10 MΩ/volt 1000 Ω/volt 100 Ω/volt 1 MΩ/volt 10 MΩ/volt 1000 Ω/volt 100 Ω/volt 1 MΩ/volt ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The time/div and voltage axes of an oscilloscope have been creased. A student connects a 1 KHz, 5 V P-P square wave calibrition pulse to channel-1 of the scope and observes the screen to be as shown in the upper trace of figure. An unknown signal is connected to channel-2 (lower trace) of the scope. If the time/div and V/div on both channels are the same, the amplitude (P-P) and period of the unknown signal are respectively 5 V, 1 ms. 10 V, 1 ms. 5 V, 2 ms. 7.5 V, 2 ms. 5 V, 1 ms. 10 V, 1 ms. 5 V, 2 ms. 7.5 V, 2 ms. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation An instrument to be used for measurement and control should preferably have Non-linear output Dead zone and dead time A highly damped response Linear output and fast response Non-linear output Dead zone and dead time A highly damped response Linear output and fast response ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Kelvin’s double bridge is used to measure low resistance because effect of contact and lead resistance is eliminated. there is no thermo electric emf. resistance variation due to temperature. it has high sensitivity. effect of contact and lead resistance is eliminated. there is no thermo electric emf. resistance variation due to temperature. it has high sensitivity. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS