Manufacturing And Production Technology Twist drills are made of Either (A) or (B) Carbon steel High speed steel Stainless steel Either (A) or (B) Carbon steel High speed steel Stainless steel ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The parameter which completely defines the chip formation in a metal cutting process is Shear angle Chip-tool contact length Both (A) and (B) None of these Shear angle Chip-tool contact length Both (A) and (B) None of these ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology A lathe with four steps on the cone pulley and with back-gears will have Eight indirect speeds Four direct and four indirect speeds Four direct speeds Four indirect speeds Eight indirect speeds Four direct and four indirect speeds Four direct speeds Four indirect speeds ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The high cutting speed and large rake angle of the tool will result in the formation of Continuous chips None of these Discontinuous chip Continuous chips with built up edge Continuous chips None of these Discontinuous chip Continuous chips with built up edge ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology In orthogonal turning of a low carbon steel bar of diameter 150 mm with uncoated carbide tool, the cutting velocity is 90 m/min. The feed is 0.24 mm/rev and the depth of cut is 2 mm. The chip thickness obtained is 0.48 mm. If the orthogonal rake angle is zero and the principle cutting edge angle is 90⁰, the shear angle in degree is 36.56 26.56 20.56 30.56 36.56 26.56 20.56 30.56 ANSWER DOWNLOAD EXAMIANS APP
Manufacturing And Production Technology The effective number of lattice points in the unit cell of simple cubic, body centered cubic, and face centered cubic space lattices, respectively, are 1, 2, 4 2, 3, 4 1, 2, 2 2, 4, 4 1, 2, 4 2, 3, 4 1, 2, 2 2, 4, 4 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS