Those solutions in which there is no volume change upon mixing the components in the liquid state and which, when diluted do not undergo any heat change (i.e. heat of dilution is zero), are called __________ solutions.

Chemical Engineering Thermodynamics
Those solutions in which there is no volume change upon mixing the components in the liquid state and which, when diluted do not undergo any heat change (i.e. heat of dilution is zero), are called __________ solutions.

Ideal

Isotonic

Real

None of these

Ideal

Isotonic

Real

None of these

ANSWER DOWNLOAD EXAMIANS APP

Chemical Engineering Thermodynamics
Generation of heat by friction is an example of a/an __________ change.

Irreversible

Isothermal

Reversible

Adiabatic

Irreversible

Isothermal

Reversible

Adiabatic

ANSWER DOWNLOAD EXAMIANS APP

Chemical Engineering Thermodynamics
Isentropic process means a constant __________ process.

Entropy

None of these

Pressure

Enthalpy

Entropy

None of these

Pressure

Enthalpy

ANSWER DOWNLOAD EXAMIANS APP

Chemical Engineering Thermodynamics
For water at 300°C, it has a vapour pressure 8592.7 kPa and fugacity 6738.9 kPa Under these conditions, one mole of water in liquid phase has a volume of 25.28 cm³ and that in vapour phase in 391.1 cm³.Fugacity of water (in kPa) at 9000 kPa will be

6753.5

6738.9

9000

7058.3

6753.5

6738.9

9000

7058.3

ANSWER DOWNLOAD EXAMIANS APP

Chemical Engineering Thermodynamics
The point at which all the three (solid, liquid and gas) phases co-exist, is known as the __________ point.

Boyle

Boiling

Triple

Freezing

Boyle

Boiling

Triple

Freezing

ANSWER DOWNLOAD EXAMIANS APP

Chemical Engineering Thermodynamics
Claussius-Clayperon equation gives accurate result, when the

Vapour pressure is relatively low and the temperature does not vary over wide limits

Volume in the liquid state is negligible compared with that in the vapour state

Vapour obeys the ideal gas law and the latent heat of vaporisation is constant

All of these

Vapour pressure is relatively low and the temperature does not vary over wide limits

Volume in the liquid state is negligible compared with that in the vapour state

Vapour obeys the ideal gas law and the latent heat of vaporisation is constant

All of these

ANSWER DOWNLOAD EXAMIANS APP

Chemical Engineering Thermodynamics

Chemical Engineering Thermodynamics Those solutions in which there is no volume change upon mixing the components in the liquid state and which, when diluted do not undergo any heat change (i.e. heat of dilution is zero), are called __________ solutions.

Chemical Engineering Thermodynamics Generation of heat by friction is an example of a/an __________ change.

Chemical Engineering Thermodynamics Isentropic process means a constant __________ process.

Chemical Engineering Thermodynamics For water at 300°C, it has a vapour pressure 8592.7 kPa and fugacity 6738.9 kPa Under these conditions, one mole of water in liquid phase has a volume of 25.28 cm³ and that in vapour phase in 391.1 cm³.Fugacity of water (in kPa) at 9000 kPa will be

Chemical Engineering Thermodynamics The point at which all the three (solid, liquid and gas) phases co-exist, is known as the __________ point.

Chemical Engineering Thermodynamics Claussius-Clayperon equation gives accurate result, when the

Chemical Engineering Thermodynamics
Those solutions in which there is no volume change upon mixing the components in the liquid state and which, when diluted do not undergo any heat change (i.e. heat of dilution is zero), are called __________ solutions.

Chemical Engineering Thermodynamics
Generation of heat by friction is an example of a/an __________ change.

Chemical Engineering Thermodynamics
Isentropic process means a constant __________ process.

Chemical Engineering Thermodynamics
For water at 300°C, it has a vapour pressure 8592.7 kPa and fugacity 6738.9 kPa Under these conditions, one mole of water in liquid phase has a volume of 25.28 cm³ and that in vapour phase in 391.1 cm³.Fugacity of water (in kPa) at 9000 kPa will be

Chemical Engineering Thermodynamics
The point at which all the three (solid, liquid and gas) phases co-exist, is known as the __________ point.

Chemical Engineering Thermodynamics
Claussius-Clayperon equation gives accurate result, when the