Chemical Reaction Engineering The percent conversion of ethanol in the reactor is 2.5 100 95 97.5 2.5 100 95 97.5 ANSWER DOWNLOAD EXAMIANS APP
Chemical Reaction Engineering In case of physical adsorption, the heat of adsorption is of the order of __________ kcal/kg.mole. 100000 10000 100 1000 100000 10000 100 1000 ANSWER DOWNLOAD EXAMIANS APP
Chemical Reaction Engineering Sulphuric acid is used as a catalyst in the Alkylation of hydrocarbons Hydrogenation of oils None of these Gas phase oxidation of SO₂ in chamber process Alkylation of hydrocarbons Hydrogenation of oils None of these Gas phase oxidation of SO₂ in chamber process ANSWER DOWNLOAD EXAMIANS APP
Chemical Reaction Engineering When a high liquid hold up is required in a reactor for gas liquid reaction, use __________ coloumn. Bubble Tray Packed Spray Bubble Tray Packed Spray ANSWER DOWNLOAD EXAMIANS APP
Chemical Reaction Engineering Rate constant for a first order reaction does not depend upon reaction time, extent of reaction and the initial concentration of reactants ; but it is a function of reaction temperature. In a chemical reaction, the time required to reduce the concentration of reactant from 100 gm moles/litre to 50 gm moles/litre is same as that required to reduce it from 2 gm moles/litre to 1 gm mole/litre in the same volume. Then the order of this reaction is 2 3 1 0 2 3 1 0 ANSWER DOWNLOAD EXAMIANS APP
Chemical Reaction Engineering For an ideal gas mixture undergoing a reversible gaseous phase chemical reaction, the equilibrium constant Increases with pressure Is independent of pressure Increases /decreases with pressure depending on the stoichiometric co-efficients of the reaction Decreases with pressure Increases with pressure Is independent of pressure Increases /decreases with pressure depending on the stoichiometric co-efficients of the reaction Decreases with pressure ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS