Building Construction The nominal thickness of one brick wall in mm, is 190 mm 90 mm 200 mm 150 mm 190 mm 90 mm 200 mm 150 mm ANSWER DOWNLOAD EXAMIANS APP
Building Construction Two columns 50 cm × 50 cm and 60 cm × 60 cm carry 80 tonnes and 120 tonnes of loads respectively. The centre to centre distance between columns is 5.00 metres. The permissible bearing capacity of the soil is 20 t/m2. If the footing is not to project more than 25 cm beyond the outside of the smaller column, pick up the correct design parameters of the footing from the following: Area of footing slab = 11.00 m2 All listed here Distance of The length of the foundation slab = 7.00 m G. of the loads from the smaller column = 3.00 m Area of footing slab = 11.00 m2 All listed here Distance of The length of the foundation slab = 7.00 m G. of the loads from the smaller column = 3.00 m ANSWER DOWNLOAD EXAMIANS APP
Building Construction In any good staircase, the maximum and minimum pitch respectively should be 75° and 30° 90° and 0° 40° and 25° 60° and 10° 75° and 30° 90° and 0° 40° and 25° 60° and 10° ANSWER DOWNLOAD EXAMIANS APP
Building Construction The stone blocks approximately triangular in shape, used as steps, are known Stone steps Spandril steps Built up steps None of these Stone steps Spandril steps Built up steps None of these ANSWER DOWNLOAD EXAMIANS APP
Building Construction Engineering news formula for obtaining safe bearing capacity of pile for drop hammer, is, Q = (W × 2.5)/6 (S + h) Q = (W × 6)/h (S + 2.5) Q = Wh/6 (S + 2.5) Q = Wh/2.5 (S + 6) Q = (W × 2.5)/6 (S + h) Q = (W × 6)/h (S + 2.5) Q = Wh/6 (S + 2.5) Q = Wh/2.5 (S + 6) ANSWER DOWNLOAD EXAMIANS APP
Building Construction To obtain good bonding in brick masonry All of these Vertical joints in alternate courses are kept in plumb line First class bricks are used Bats are used where necessary All of these Vertical joints in alternate courses are kept in plumb line First class bricks are used Bats are used where necessary ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS