Measurement and Instrumentation The meter constant of an energy meter is 1500 rev/kWh, the disc makes 3000 revolution in a given time. The energy consumed is 2 kWh 3 kWh 4 kWh 1 kWh 2 kWh 3 kWh 4 kWh 1 kWh ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation For measuring an AC voltage by an AC potentiometer it is desirable that the supply for the potentiometer is taken from The same source as the unknown voltage. A source other than the source of unknown voltage. Any of above. A battery. The same source as the unknown voltage. A source other than the source of unknown voltage. Any of above. A battery. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation A moving coil of a meter has 100 turns, and a length and depth of 10 mm and 20 mm respectively. It is positioned in a uniform radial flux density of 200 mT. The coil carries a current of 50 mA. The torque on the coil is 200 µNm. 100 µNm. 2 µNm. 1 µNm. 200 µNm. 100 µNm. 2 µNm. 1 µNm. ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation Commonly used instruments in power system measurement are Rectifier Induction Electrostatic Moving coil or iron Rectifier Induction Electrostatic Moving coil or iron ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The full-scale deflection current of an ammeter is 1 mA and its internal resistance is 100°hm. If this meter is to have full deflection at 5A, what is the value of the shunt resistance to be used? 49.99 Ohms 1/49.99 ohms 2 Ohms 1 Ohm 49.99 Ohms 1/49.99 ohms 2 Ohms 1 Ohm ANSWER DOWNLOAD EXAMIANS APP
Measurement and Instrumentation The resistance of a circuit is measured from the relation R= P/I2, where P is the power fed into the circuit and I is the current flowing through it. If the limiting errors in the measurement of power and current are respectively ± 1.0% and ± 1.0%, then what will be the limiting error in measurement of resistance ? ±0.5% ± 1.5% ± 3.0% ±3.5% ±0.5% ± 1.5% ± 3.0% ±3.5% ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS