Digital Electronics The logic expression AB can be implemented by giving the inputs A and B to a two-input X-NOR gate NAND gate NOR gate X-OR gate X-NOR gate NAND gate NOR gate X-OR gate ANSWER DOWNLOAD EXAMIANS APP
Digital Electronics The output of a logic gate is 0 when all its inputs are at logic 1. The gate is either a NAND or an X-OR a NAND or an AND a NOR or an X-NOR a NAND or an X-NOR a NAND or an X-OR a NAND or an AND a NOR or an X-NOR a NAND or an X-NOR ANSWER DOWNLOAD EXAMIANS APP
Digital Electronics OR-AND realization of a combinational circuit is equivalent to NAND-NOR realization NOR-NAND realization NOR-NOR realization NAND-NAND realization NAND-NOR realization NOR-NAND realization NOR-NOR realization NAND-NAND realization ANSWER DOWNLOAD EXAMIANS APP
Digital Electronics The simplified block diagram of a 10-bit A/D converter of dual slope integrator type is shown in figure. The 10-bit counter at the output is clocked by a 1 Mhz clock. Assuming negligible timing overhead for the control logic, the maximum frequency of the analog signal that can be converted using this A/D converted is approximately . 1 KHz. 2 KHz. 250 Hz. 500 Hz. 1 KHz. 2 KHz. 250 Hz. 500 Hz. ANSWER DOWNLOAD EXAMIANS APP
Digital Electronics To get an excess-3 code from BCD code 0110 is subtracted 0011 is added 0011 is subtracted 0110 is added 0110 is subtracted 0011 is added 0011 is subtracted 0110 is added ANSWER DOWNLOAD EXAMIANS APP
Digital Electronics In MSI, the number of gate circuits per chip is < 500 < 50 12 to 99 50 to 100 < 500 < 50 12 to 99 50 to 100 ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS