Electrical Machines Tertiary winding in a transformer is mostly star connected. zig - zag delta connected. delta connected. zig - zag star connected. star connected. zig - zag delta connected. delta connected. zig - zag star connected. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines In Ward-Leonard method of speed control, the direction of rotation of motor is reversed usually reversing the connection of the motor armature terminal. generator armature terminal. generator field terminal. motor field terminal. motor armature terminal. generator armature terminal. generator field terminal. motor field terminal. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines The power developed by salient pole synchronous machine is/are power due to saliency or reluctance only None of these excitation power only both 1 and 2 power due to saliency or reluctance only None of these excitation power only both 1 and 2 ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A DC shunt generator builds up to a voltage of 220 V at no load while running at its rated speed. If the speed of the generator is raised by 25% kepping the circuit conditions unaltered, then the Voltage to which the machine would build up will increase to value lying between 220 V and 1.25 times 220 V not change and remain at 220 V increase to a value greater than 1.25 times 220 V increase to 1.25 times 220 V increase to value lying between 220 V and 1.25 times 220 V not change and remain at 220 V increase to a value greater than 1.25 times 220 V increase to 1.25 times 220 V ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A 500 V, 55 kVA single phase alternator has an effective resistance of 0.5 Ω. An excitation current of 10 A produces 200 A armature current on short circuit and an emf of 450 V on per circuit. The synchronous reactance will be 2.241 Ω. 25.564 Ω. 2.781 Ω. 2.74 Ω. 2.241 Ω. 25.564 Ω. 2.781 Ω. 2.74 Ω. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A 5 KVA transformer has a turns ratio of N1/N2 = 10. The impedance of primary winding is 3+j5 ohms while that of secondary winding is 0.5+j0.8 ohms. The impedance of transformer when referred to primary will be 53+j85 ohms 8+j13 ohms 3.5+j5.8 ohms 3.05+j5.08 ohms 53+j85 ohms 8+j13 ohms 3.5+j5.8 ohms 3.05+j5.08 ohms ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS