Process Control and Instrumentation Temperature measurement by optical pyrometer is done above __________ point, which is 1063°C. Antimony Nickel Silver Gold Antimony Nickel Silver Gold ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation A control system is unstable, if the open loop frequency response exhibits an amplitude ratio exceeding unity at the crossover frequency. This is __________ criterion. None of these Nyquist Routh stability Bode stability None of these Nyquist Routh stability Bode stability ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation Dome temperature of blast furnace stove is most accurately measured by a Platinum resistance thermometer Platinum-platinum/rhodium ther-mocuple Iron-constantan thermocouple Radiation pyrometer Platinum resistance thermometer Platinum-platinum/rhodium ther-mocuple Iron-constantan thermocouple Radiation pyrometer ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation Which is the most suitable instrument for measuring pressure below 3 microns? Bourdon guage Alphatron Ionisation gauge Mcleoid gauge Bourdon guage Alphatron Ionisation gauge Mcleoid gauge ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation A negative gain margin expressed in decibels means a/an __________ system. Stable Critically damped Unstable None of these Stable Critically damped Unstable None of these ANSWER DOWNLOAD EXAMIANS APP
Process Control and Instrumentation A non-linear chemical system is exemplified by a/an Isothermal CSTR None of these Non-isothermal CSTR Mixer Isothermal CSTR None of these Non-isothermal CSTR Mixer ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS