Petroleum Refinery Engineering Tanks used for the storage of petroleum products (which are inflammable) should be painted with a __________ paint. Yellow Black Red White Yellow Black Red White ANSWER DOWNLOAD EXAMIANS APP
Petroleum Refinery Engineering Carbon percentage (by weight) in crude petroleum may be about 95 65 75 85 95 65 75 85 ANSWER DOWNLOAD EXAMIANS APP
Petroleum Refinery Engineering Liquefied Petroleum Gas (LPG) in domestic use cylinders is in the liquid form. The density of LPG in liquid form is about __________ of that of water (i.e. 1 gm/c.c). One fourth One eighth Half One third One fourth One eighth Half One third ANSWER DOWNLOAD EXAMIANS APP
Petroleum Refinery Engineering Smoke point of a test sample of kerosene is found to be 15 mm. On removal of __________ from it, the smoke point rises to 25 mm. None of these N-paraffins Aromatics Olefins None of these N-paraffins Aromatics Olefins ANSWER DOWNLOAD EXAMIANS APP
Petroleum Refinery Engineering Char value of Kerosene is the amount of charred oil deposition on the wick obtained after burning it in a standard wick lamp at a standard rate for 24 hours. Char value of a good quality kerosene should be less than __________ mg/kg of kerosene. 500 20 100 1 500 20 100 1 ANSWER DOWNLOAD EXAMIANS APP
Petroleum Refinery Engineering Hydrofining is the most recent and effective method for the Improvement of smoke point Removal of sulphur Reduction of breathing loss Improvement of viscosity index Improvement of smoke point Removal of sulphur Reduction of breathing loss Improvement of viscosity index ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS