Electrical Machines Stray losses in transformer occurs in transformer insulating oil. winding conductors and steel structures of transformer. steel core. paper insulation in transformers. transformer insulating oil. winding conductors and steel structures of transformer. steel core. paper insulation in transformers. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A DC shunt generator builds up to a voltage of 220 V at no load while running at its rated speed. If the speed of the generator is raised by 25% kepping the circuit conditions unaltered, then the Voltage to which the machine would build up will increase to value lying between 220 V and 1.25 times 220 V increase to a value greater than 1.25 times 220 V not change and remain at 220 V increase to 1.25 times 220 V increase to value lying between 220 V and 1.25 times 220 V increase to a value greater than 1.25 times 220 V not change and remain at 220 V increase to 1.25 times 220 V ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines A 4 pole dynamo with wave wound armature has 51 slots contains 20 conductors in each slot. If induced emf 357 Volts and speed is 8500 rpm, flux per pole will be 1.2 mWb. 1.4 mWb. 3.5 mWb. 2.7 mWb. 1.2 mWb. 1.4 mWb. 3.5 mWb. 2.7 mWb. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines The stator core of a 3 - Φ induction motor is laminated in order to reduce the both of the above. weight of the stator. eddy current loss. hysteresis loss. both of the above. weight of the stator. eddy current loss. hysteresis loss. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines In synchronous generator V curve is drawn between field current on X-axis and armature current on Y-axis. field current on Y-axis and armature current on X-axis. field current on X-axis and power factor on Y-axis. either of these. field current on X-axis and armature current on Y-axis. field current on Y-axis and armature current on X-axis. field current on X-axis and power factor on Y-axis. either of these. ANSWER DOWNLOAD EXAMIANS APP
Electrical Machines Short circuiting is caused in the armature winding due to failure of insulation between two commutator bars. any of above. failure of insulation between two turns of coil. grounding of two or more turns of the same coil. failure of insulation between two commutator bars. any of above. failure of insulation between two turns of coil. grounding of two or more turns of the same coil. ANSWER DOWNLOAD EXAMIANS APP
EXAMIANS